Skip to content
Castellano ElectricalLevel 2 ASP Electricians
Level 2 ASP Service

Service Upgrades (Single to Three Phase & Amperage) in Sydney

Increasing your supply capacity — single phase to three phase conversion and amperage upgrades for modern electrical loads.

What is service upgrades (single to three phase & amperage)?

A service upgrade increases the electrical capacity coming into your property. The two most common upgrades are converting from single phase to three phase power, and increasing the amperage of your existing supply. Both involve work on the consumer mains and the point of attachment, and both require a Level 2 ASP because the upgrade touches the network connection — not just your internal wiring.

Homeowners typically upgrade because modern loads have outgrown an older supply: ducted air conditioning, a pool or spa, an EV charger, a workshop, a granny flat, or a large solar and battery system. Three phase power spreads load across three circuits and is often required for ducted systems, EV fast chargers and larger solar inverters. An amperage increase (for example from 63A to 100A per phase) gives a single-phase home more headroom without the cost of going three phase. We assess your current and future load and recommend the most cost-effective option.

Castellano Electrical handles the full upgrade: confirming what your distributor will allow at your address, lodging the application with Ausgrid or Endeavour Energy, upgrading the consumer mains and point of attachment, and upgrading or replacing the switchboard and main switch to suit the new supply. Where the existing overhead service is undersized we replace it; where you are also converting to underground we coordinate both works together. You receive a compliant switchboard, correctly rated mains, and the certificates to prove it.

Why only a Level 2 ASP can do this work

Service Upgrades (Single to Three Phase & Amperage) is work on the network side of your electricity supply — the connection between the distributor's network and your meter. A standard electrician is licensed for the wiring inside your property, but only a Level 2 Authorised Service Provider (ASP) is authorised to connect, disconnect or alter that supply. If this work is done by a non-ASP, the distributor will not energise it and it has to be redone.

Castellano Electrical holds Level 2 ASP authorisation for both Ausgrid and Endeavour Energy, so we can carry out service upgrades (single to three phase & amperage) anywhere in Greater Sydney and manage the distributor process for you. You can read more about electrical licensing in NSW via NSW Fair Trading.

The process, step by step

  1. Load assessment. We assess your current and future load and recommend three-phase or an amperage increase.
  2. Distributor application. We confirm what is available at your address and lodge the upgrade application.
  3. Upgrade mains & POA. We install upgraded consumer mains and a compliant point of attachment.
  4. Switchboard upgrade. We upgrade the switchboard and main switch to suit the new supply capacity.
  5. Certify. We test, energise and issue your electrical safety certificate.

Key benefits

  • Single-phase to three-phase conversion for high-demand loads
  • Amperage increases to support EV charging, A/C, pools and solar
  • Correctly rated consumer mains and point of attachment
  • Switchboard and main switch upgraded to current standards
  • Distributor application and approval handled end to end

Distributor coverage & service areas

We provide service upgrades (single to three phase & amperage) across both Sydney network areas. Your property's distributor determines the application process and standards, and we are authorised for both:

  • Ausgrid: Ausgrid operates the electricity network across the Sydney CBD, eastern suburbs, inner west, lower and upper north shore, northern beaches, the Central Coast and the Hunter.
  • Endeavour Energy: Endeavour Energy operates the network across Greater Western Sydney, the South West, the Blue Mountains, the Southern Highlands and the Illawarra.

Not sure which network covers you? Our Ausgrid vs Endeavour Energy service areas guide breaks it down suburb by suburb, or see all the Sydney areas we cover.

What does it cost?

Upgrade cost depends on whether you go three phase or increase amperage, mains length and switchboard condition. Firm quote provided after assessment.

Service Upgrades (Single to Three Phase & Amperage): your questions answered

What is a service upgrade?

It is increasing the electrical capacity into your property — either converting from single phase to three phase, or increasing the amperage of your existing supply. Both involve work on the consumer mains and point of attachment, so they are Level 2 ASP jobs.

Do I need three phase or just more amps?

Three phase suits ducted air conditioning, EV fast charging, large solar systems and workshops. An amperage increase gives a single-phase home more capacity at lower cost. We assess your loads and recommend the most cost-effective option.

Why can’t a regular electrician do my upgrade?

A standard (Level 1) electrician is licensed to work on the wiring inside your property, but only a Level 2 Authorised Service Provider (ASP) is authorised by the network distributor to work on the connection between the network and your meter. That includes connections, disconnections, the consumer mains, the point of attachment and metering. Using a non-ASP for this work is illegal and the distributor will not energise it.

How long does a service upgrade take?

The on-site work is usually completed in a day, with some upgrades requiring distributor approval beforehand. We confirm the timeline and manage the application as part of the job.

Will my switchboard need upgrading too?

Often yes. A capacity upgrade usually means upgrading the switchboard, main switch and sometimes the consumer mains to safely carry the new load. We include this in the quote so there are no surprises.

Will the power be off during the upgrade?

There is usually a planned outage while we change over the supply and switchboard. We schedule it to suit you and keep it as short as possible.

Is three phase available at my address?

In most established and newer Sydney suburbs three phase is available, but it depends on the network in your street. We confirm availability with Ausgrid or Endeavour Energy before quoting.

How much does a service upgrade cost?

It depends on whether you go three phase or increase amperage, the length of the consumer mains and the condition of your switchboard. We provide a firm quote after assessing the site.

Get a free quote for service upgrades (single to three phase & amperage)

Tell us about your job and we’ll confirm your network distributor, scope the work and get back to you with a quote — usually within one business day. For urgent connections or disconnections, call our 24/7 line.

Ausgrid Authorised Endeavour Energy Authorised
Level 2 ASP
ASP 24187
Electrical contractor licence
248317C
Public liability
$20 million
Professional indemnity
$1 million
Workmanship warranty
12 months on all workmanship
Established
2009

No obligation. We typically reply within one business day.

Need a Level 2 ASP electrician in Sydney?

Authorised for Ausgrid and Endeavour Energy. Free quotes for planned work, 24/7 response for emergencies.

Prefer to talk? Office line (02) 8503 7421 · Mon–Fri: 7:00am – 5:00pm

Emergency Call24/7 Emergency · 0488 271 904Book a Quote